Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 70G) Cylinder Internal Diameter = 32 mm , Stroke Length S=200 mm - RE 17016/07.03

Supplier:
User Library
Model Name:
Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 70G) Cylinder Internal Diameter = 32 mm , Stroke Length S=200 mm - RE 17016/07.03
Configuration Name:
Part Number:
CD70G32-22-200Z1X
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 26,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CD70G32-22-200Z1X
Name:Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 70G) Cylinder Internal Diameter = 32 mm , Stroke Length S=200 mm - RE 17016/07.03
Description:For the Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 70G) with a 32 mm internal diameter and 200 mm stroke, the specific technical data from the official documentation can be detailed. The G in the model number typically indicates a specific mounting style, such as a fork at the cylinder base . 📊 Technical Specifications for CD70G Cylinder (32mm Piston) Based on the official Rexroth documentation , here are the key specifications and dimension data for your cylinder size: Parameter Specification Series CD70G Tie-Rod Hydraulic Cylinder Nominal Pressure 70 bar (7 MPa) Piston Diameter (ØAL) 32 mm Stroke Length (X*) 200 mm (as requested) Piston Rod Diameter (ØMM) 18 mm, 22 mm, or 25 mm (Standard options) Port Thread (EE) G 1/4 📏 Dimensional Data The following table includes the critical dimensions for a 32mm piston from the CD70 series design guide : Dimension Value (mm) for 32mm Piston Description ØMM 18 / 22 / 25 Piston Rod Diameter XV 80 + Stroke / 73 + Stroke Trunnion to base dimension (depends on rod Ø) ZJ 115 (for 18mm rod) / 124 (for 22, 25mm rod) Retracted length (without cushioning) ZM 153 (for 18mm rod) / 171 (for 22, 25mm rod) Extended length (without cushioning) EE G 1/4 Port thread Please note: The values for ZJ and ZM (overall lengths without cushioning) are estimates based on the dimensional table. The XV dimension is the position of the trunnion bearing and is dependent on the stroke and the piston rod diameter. 🔩 Important Installation Note The provided documentation indicates that for a 32mm piston diameter, the maximum possible stroke length without a support bearing may be limited due to piston rod buckling risk . For a stroke of 200mm, this is permissible, but consulting the full "admissible stroke lengths" table in the official datasheet is recommended for confirmation.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (16)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)