Tie Rod Type Cylinder CD (BOSCH , Rexroth) Range T3 to ISO 6022/2 , DIN 24554. - CDT3 MT1. - Bore Diameter D=160 mm. - With Stroke Length S=200 mm.

Supplier:
User Library
Model Name:
Tie Rod Type Cylinder CD (BOSCH , Rexroth) Range T3 to ISO 6022/2 , DIN 24554. - CDT3 MT1. - Bore Diameter D=160 mm. - With Stroke Length S=200 mm.
Configuration Name:
Part Number:
CDT3MT1-160-110-200
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: September 03,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CDT3MT1-160-110-200
Name:Tie Rod Type Cylinder CD (BOSCH , Rexroth) Range T3 to ISO 6022/2 , DIN 24554. - CDT3 MT1. - Bore Diameter D=160 mm. - With Stroke Length S=200 mm.
Description:The Rexroth CDT3-MT1 with a 160 mm bore and 200 mm stroke is a standard configuration from this tie-rod cylinder series. The "MT1" mounting style refers to a head trunnion mount, which allows the cylinder to pivot around a fixed axis at its front end . Here are the key specifications for your cylinder, along with a set of suggested hashtags for your post. 🔧 Key Specifications: CDT3-MT1, 160mm Bore, 200mm Stroke Parameter Specification for CDT3-MT1 (160mm Bore) Series CD – Single-rod hydraulic cylinder, T3 Style Mounting Type MT1 – Head trunnion (pivot at the cylinder head) Nominal Pressure 160 bar (16 MPa) Standards ISO 6020-2, DIN 24554 Piston Diameter (ØAL) 160 mm Piston Rod Diameter (ØMM) For a 160 mm bore, standard rod options include 70 mm and 90 mm, but other sizes are also available . Stroke Length (S) 200 mm (Series max is 3,000 mm) ⚙️ Mounting Details and Ordering Notes Head Trunnion Mounting: The MT1 style allows the cylinder to pivot at its front end. This helps to compensate for misalignments in the application and reduce side loads on the piston rod and seals . Periodic greasing of the trunnions is recommended for long service life . Trunnion Position: For the MT1 mounting, the trunnion position is typically at the cylinder head. The position is fixed and you do not need to specify an "XV" dimension in the clear text, unlike with a center trunnion (MT4) mount . Ordering Code Reference: The complete Rexroth ordering code follows this structure. A full example is CDT3MT1/160/70/200Z3X/B11..., where you would specify the rod diameter, cushioning options, seal type, and other required features .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (28)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)