Digi-Key

Manufacturer Würth Elektronik Manufacturer Part Number 693061010911 CONN SD CARD PUSH-PUSH R/A SMD Detailed Description: 11 (9 + 2) Position (9 SDCard + WriteProtect + CardDetect pin) Card Connector Secure Digital - SD Surface Mount, Right Angle Gold Link: https://www.digikey.com/product-detail/en/w%C3%BCrth-elektronik/693061010911/732-3816-1-ND/3124597

Texas Instruments

VQFN14-pin package4x3.5mm

Texas Instruments

TI QFN RSH5656 pinPitch 0.4mm

Texas Instruments

The AFE4420 is an analog front-end for optical bio-sensing applications, such as heart-rate monitoring (HRM) and saturation of peripheral capillary oxygen (SpO2). The device supports up to four switching light-emitting diodes (LEDs) and up to four photodiodes. Up to 16 signal phases can be defined and the signal can be acquired from each phase in a synchronized manner and stored in a 128-sample First in, First out (FIFO) block. The FIFO can be read out using either an I2C or a SPI interface. The AFE also has a fully integrated LED driver with an 8-bit current control. The device has a high dynamic range transmit-and-receive circuitry that helps with the sensing of very small signal levels.

QT8 QFN28 CMX901 CMX902 RF amp

Vishay

POWERPAK 1212-8SWLH

CC3100MOD

Wi-Fi Transceiver Module CC3100MODR11MAMOB

Shield Electric

The NodeMcu is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines. SPECIFICATION The Development Kit based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your development in the fastest way, culminating with NodeMCU Firmware! USB-TTL included, plug&play 10 GPIO, Every GPIO can be PWM, I2C, 1-wire PCB antenna

Shield Electric

None Provided

None Provided