Avtron Encoders

Models inAvtron Encoders CatalogEncoders
Results 1-10 of 43
< Previous Page12345Next Page >
Results per page:
Name
Part Number
Supplier
Description


HS35X MagneticHollow Shaft Encoder

  • Fits Shafts 1/2" to 1" <12mm-25mm>
  • IP66 Seals
  • Up to 10,000 PPR
  • Fully Encapsulated Electronics
  • Onboard Diagnostics with LED
  • Drives up to 1000 feet <330m> cable
  • Full Protection from Miswiring
  • Replaces Competitive Models Without Rewiring
  • -40°C to +100°C Operation
  • 2 Year No-Hassle Warranty
    • Category
    Configurations?
    Yes
    Downloads
    97
    Added on
    28 Feb, 2022
    Name
    Part Number
    Supplier
    Description


    AV485 SMARTach II Encoder

  • Fits 4.5" Nema 56C face motor flange adapters with 5.875" bolt circle or optional foot mount
  • Severe duty construction for heavy industries and outdoor use.
  • Standard resolutions from 60-4096 pulses per revolution-an industry first for a magnetic encoder!
  • Standard Operating Temperature Range of -20C to +80C, Options of -40C to +80C, & -20C to +120C
  • Fully Potted Electronics for Heavy, Mill-duty environments, field replaceable sensors for fast service
  • 165kHz Output with HTL or TTL Line Driver with short circuit/miswire protection on all lines!!
  • 0.050"" Wide-Gap Sensors with built-in diagnostic LED indicator for fast troubleshooting

    No other encoder on the market beats the SMARTach II Series encoders in robustness or reliability. It's wide operating temperature range coupled with protected electronics, robust housing design, and viton shaft seals ensures years of troublefree service. The Wide-Gap sensor technology yields an installation that performs year after year without attention. A built-in micro controller even makes adjustments on the fly to optimize signal quality for the life of the sensor! The AV485 is available with single or dual isolated outputs that can be different pulse rates if needed, and single or dual shaft extensions as needed. Direct replacements for many competitive units down to the same pinout connectors for fast swaps. Don't trust your productivity to a cheaper alternative, they will cost you 3 times more in replacement costs alone!
    • Category
    Configurations?
    Yes
    Downloads
    130
    Added on
    1 Feb, 2022
    Name
    Part Number
    Supplier
    Description


    AV125 SMARTach II Encoder

  • Fits AC & DC motors with 12.5" C face and 11"" bolt circle
  • Thin, compact style, great for brake or gear motors as a sandwiched encoder
  • Standard resolutions from 60-4096 pulses per revolution-an industry first for a magnetic encoder!
  • No bearings or couplings to fail, two piece design for easy, no hassle, installations
  • Set Screw Rotor Mount for through shaft mounted applications up to 7.875" shaft diameter
  • Standard Operating Temperature Range of -40C to +100C
  • Fully Potted Electronics for Heavy, Mill-duty environments, field replaceable sensors for fast service
  • 165kHz Output with HTL or TTL Line Driver with short circuit/miswire protection on all lines!!
  • 0.050" Wide-Gap Sensors with +/-0.100" Axial Shaft End Play tolerance without losing the signals!!
  • Diagnostic LED on each sensor for fast troubleshooting to prevent unnecessary encoder replacements

    No other encoder on the market beats the SMARTach II Series encoders in robustness or reliability. It's wide operating temperature range coupled with protected electronics, robust housing design with no bearings or couplings to worry about, and wide-gap sensor technology yields an installation that performs year after year without attention. The wide-gap sensor technology prevents contaminates from grinding against the sensor, and prevents worn motor bearings from grinding the rotor into the sensor. The wide gap also means no more sensor adjustments! Large radial and axial movement tolerance means no signal losses even during a sudden load change on the motor!
    • Category
    Configurations?
    Yes
    Downloads
    83
    Added on
    1 Feb, 2022
    Name
    Part Number
    Supplier
    Description


    M3 Universal Optical Encoder

  • Universal Optical Encoder, Mill Duty
  • Available with 5/8"" Solid Shaft or 5/8" - 2-3/8"" or 16mm-61mm Hollow
  • Shaft, End or Through Shaft Mount
  • Shaft Grounding Option
  • Standard resolutions of 80-2500 pulses per revolution
  • Many connector or cable length choices for easy replacement of existing encoders, pin compatible with existing cable plugs
  • Many tether hardware options for motor and roll shaft applications
  • Shaft adapters available for many popular brand motors
  • Clean, crisp square wave outputs in quadrature with marker pulse standard
  • No glass disks to break. Only metal disks are used for durability
  • Phase C divide by 4 output (phase C and /C) for use with small counters and displays-no second output necessary!
  • Foot Mount Option for solid shaft version
  • HTL & TTL line driver options
  • Many special options available to customize the encoder to your application, such as special tether hardware, etc.

    The M3 Universal Optical Encoder was introduced to make it easy to get an encoder on a motor or roll shaft even if it was not designed with an accessory shaft/mount. The clean signals coupled with time tested performance make the M3 an easy choice in applications where ambient conditions are controlled but there may be occasional dust or occasional condensation. Two Foot Mounting brackets are offered to take advantage of drilled holes used with older Avtron Classic Optical Encoders, analog tachogenerators, and competitor's foot mounted encoders.

    A truly universal design to make your life easier when applying an encoder to your applications.
    • Category
    Configurations?
    Yes
    Downloads
    65
    Added on
    1 Feb, 2022
    Name
    Part Number
    Supplier
    Description


    M6C Flameproof /M7 Extreme Low Temperature Encoders

  • Standard resolutions of 240-1200 pulses per revolution
  • Terminal Box with or without European Cable Gland on each output
  • Threaded Rod Torque Arm Tether Kit available
  • Clean square wave outputs in quadrature with optional marker pulse
  • No glass disks to break. Only metal disks are used for durability
  • 3 HTL line driver options available
  • Specially suited for drilling rig applications on draw works and rotary tables

    M6C Flameproof Encoder
  • Flameproof/ATEX Class I, Zone 1, Heavy Mill Duty, Hollow Shaft Mounted
  • Available with 1" to 2-3/8" Hollow Shaft, End Shaft Mounted
  • -40C Low temperature option available for northern lattitude operation
  • EEx de IIc T4 rating

    M7 Extreme Low Temperature Encoder
  • Heavy Mill Duty Magnetic Encoder with -45C Low Temperature Range for Arctic Applications
  • Available with 1" & 1-1/8"" Hollow Shaft, End Shaft Mounted

    The M6C Flameproof Magnetic Encoder and the M7 Magnetic Encoder were introduced to replace troublesome low end encoders on rugged oil drilling rig applications. These units must endure harsh, outdoor, arctic, environments and perform 24/7 with high reliability. Whether on a land rig, sea rig, portablerig, or any other Zone 1 application, the M6C or the M7 is the choice for many OEM's for good reason: Performance when it counts! Now with 12-24vDC Line Driver for use with any drive! One part number covers all applications for simplicity and reduced spares!
    • Category
    Configurations?
    Yes
    Downloads
    39
    Added on
    1 Feb, 2022
    Name
    Part Number
    Supplier
    Description


    AV685 SMARTach II Encoder

  • 1.125" Hollow Shaft Mounted Encoder
  • Severe duty construction for heavy industries and outdoor use
  • Standard resolutions from 60-4096 pulses per revolution-an industry first for a magnetic encoder!
  • Standard Operating Temperature Range of -20C to +80C, Options of -40C to +80C, & -20C to +120C
  • Shaft Grounding Option
  • Fully Potted Electronics for Heavy, Mill-duty environments, field replaceable sensors for fast service
  • 165kHz Output with HTL or TTL Line Driver with short circuit/miswire protection on all lines!!
  • 0.050" Wide-Gap Sensors with built-in diagnostic LED indicator for fast troubleshooting

    No other encoder on the market beats the SMARTach II Series encoders in robustness or reliability. It's wide operating temperature range coupled with protected electronics, robust housing design, and viton shaft seals ensures years of trouble free service. The Wide-Gap sensor technology yields an installation that performs year after year without attention. A built-in micro controller even makes adjustments on the fly to optimize signal quality for the life of the sensor! The AV685 is available with single or dual isolated outputs that can be different pulse rates if needed, and end or through shaft mounting options as needed. Don't trust your productivity to a cheaper alternative. They will cost you 3 times more in replacement costs alone!

    • Category
    Configurations?
    Yes
    Downloads
    148
    Added on
    1 Feb, 2022
    Name
    Part Number
    Supplier
    Description


    HS35A Optical Hollow Shaft Encoder

  • Industry Standard Size 35, 3.5" diameter
  • Standard resolutions from 100 to 5,000 pulses per revolution
  • Standard Operating Temperature Range of -20C to +100C
  • Hollow Shaft Sizes include 1/2" to 1" & 12mm-20mm
  • Frequency Output of 125kHz with Line Driver Output
  • HTL, TTL, or Open Collector Outputs Available

    The Avtron HS35A Optical Hollow Shaft Encoder line is a step up from the usual encoders offered today. An advanced ASIC design minimizes part count, improves reliability through the use of non-breakable disks and eliminates adjustable potentiometers that cause drift over time. Pinout compatibility with competitive units make swaps an easy task using your existing cable plugs on 6, 7, and 10 pin MS connectors. The use of industry standard 1.25"" pilot and face details make mechanical swaps a breezeas well.

    Stop struggling with inferior, low end, encoders and raise your production uptime today!
    • Category
    Configurations?
    Yes
    Downloads
    203
    Added on
    1 Feb, 2022
    Name
    Part Number
    Supplier
    Description


    HS25A Optical Hollow Shaft Encoder

  • Industry Standard Size 25, 2.5" diameter
  • Resolutions from 1 to 3,600 pulses per revolution standard, up to 8,192 ppr available
  • Standard Operating Temperature Range of -20C to +100C
  • Hollow Shaft Sizes include 3/8"" to 3/4" & 6mm-19mm
  • Frequency Output of 125kHz with Line Driver Output
  • HTL, TTL, or Open Collector Outputs Available

    The Avtron HS25A Optical Hollow Shaft Encoder line is a step up from the usual encoders offered today. An advanced ASIC design minimizes part count, improves reliability through the use of non-breakable disks and eliminates adjustable potentiometers that cause drift over time. Pinout compatibility with competitive units make swaps an easy task using your existing cable plugs on 6, 7, and 10 pin MS connectors. The use of industry standard 1.25"" pilot and face details make mechanical swaps a breeze as well.

    Stop struggling with inferior, low end, encoders and raise your production uptime today!
    • Category
    Configurations?
    Yes
    Downloads
    78
    Added on
    1 Feb, 2022
    Name
    Part Number
    Supplier
    Description


    AV850 SMARTach II Encoder

  • Fits GE DC and other 8.5" motor flanges with 7.25" bolt circle
  • Thin, compact style, great for brake or gear motors as a sandwiched encoder
  • Standard resolutions from 60-4096 pulses per revolution-an industry first for a magnetic encoder!
  • No bearings or couplings to fail, two piece design for easy, no hassle, installations
  • Universal Rotor Mount for one part number common spare and simple, no adjustments installation
  • CamScrew Rotor Mount for through shaft mounted applications up to 4.5" rotor bore size
  • Standard Operating Temperature Range of -40C to +100C Shaft Grounding Option
  • Fully Potted Electronics for Heavy, Mill-duty environments, field replaceable sensors for fast service
  • 165kHz Output with HTL or TTL Line Driver with short circuit/miswire protection on all lines!!
  • 0.050" Wide-Gap Sensors with +/-0.100" Axial Shaft End Play tolerance without losing the signals!!
  • Diagnostic LED on each sensor for fast troubleshooting to prevent unnecessary encoder replacements

    No other encoder on the market beats the SMARTach II Series encoders in robustness or reliability. It's wide operating temperature range coupled with protected electronics, robust housing design with no bearings or couplings to worryabout, and wide-gap sensor technology yields an installation that performs year after year without attention. The wide-gap sensor technology prevents contaminates from grinding against the sensor, and prevents worn motor bearings from grinding the rotor into the sensor. The wide gap also means no more sensor adjustments! Large radial and axial movement tolerance means no signal losses even during a sudden load change on the motor!
    • Category
    Configurations?
    Yes
    Downloads
    444
    Added on
    1 Feb, 2022
    Name
    Part Number
    Supplier
    Description


    HS35M Magnetic Hollow Shaft Encoder

  • Industry Standard Size 35, 3.5" diameter
  • Standard resolutions from 1 to 2,500 pulses per revolution
  • Standard Operating Temperature Range of -20C to +85C
  • Hollow Shaft Sizes include 1/2" to 1-1/8" & 12mm-30mm
  • Frequency Output of 165kHz with Line Driver Output
  • HTL, TTL, or Open Collector Outputs Available

    The Avtron HS35M Magnetic Hollow Shaft Encoder line is an industry first magnetic, low cost encoder. The advantage of magnetic sensors is immunity to contaminates like condensates and dust that stop optical encoders in their tracks! The small form factor coupled with an available mini-Epic Style connector with screw terminations makes choosing the HS35M over low quality optical encoders with solder connections a no brainer!

    No more lost mating plug parts, no more incorrect, cold, or bridged solder joints, and faster installation onsite! If your application has marginal contamination that is failing optical encoders, switch to the HS35M! Stop struggling with inferior, low end, encoders and raise your production uptime today!
    • Category
    Configurations?
    Yes
    Downloads
    301
    Added on
    1 Feb, 2022
    All products for this supplier

    Contact Details
    Address:
    243 Tuxedo Ave
    Cleveland, 44131
    Ohio, United States
    Phone: 216-642-1230
    Fax: 216-642-6037
    Email:
    Website: Http://www.avtronencoders...