Our multiples grades of silicone-based absorbers can lessen a wide variety of problems including cavity resonance and reflectivity challenges. Designed for all environmental situations, our elastomers provide superior weather resistance. The full range is designed to operate at various frequencies from a few hundreds of Mhz to above 100 Ghz.

ECCOSORB 5G HiF 1 is a dielectrically loaded elastomer absorber covering the high frequencies of the 5G mm Wave range above 40 Ghz.

Eccosorb 5G MeF 1 is an elastomer absorber addressing the medium range 18 to 40 Ghz 5G range

Eccosorb MCS is a thin, flexible, high-loss, silicone absorber covering 800 Mhz up to above 6 Ghz.

Eccosorb BSR / MFS is a thin, flexible absorber covering from 6 Ghz to 18 Ghz.

Eccosorb GDS is a thin, flexible, high-loss, rubber sheet absorber. It address the 18-35 Ghz band . A ULV0 flame resistant version is available

Eccosorb MMI is a flexible absorber based on dielectric loss fillers covering from 35 Ghz to up above 100 Gh

Eccosorb JCS is an electrically conductive absorber rubber sheet for cavity resonance as well as insertion loss application purpose in the higher frequency band 

Eccosorb SF is a narrow banded, resonant absorber sheet for free-space applications covering from 1Ghz up to 26 Ghz

ECCOSORB FGM is a series of thin, flexible, broadband, absorbers operating as free space absorbers between 2.0 to 12.0 GHz.

Features and Benefits:

•    High temperature operation up to 170°C

•    PSA available

•    UL rated grade

Website Link:  Product Catalog Page

Q-Zorb  absorbers are tuned to discrete frequencies between 500MHz and 100GHz. They are available in resonant single band or broadband surface attenuation version.  The materials are thin, flexible and easy to cut and install. They are elastomer based with a variety of choices available.

Microwave absorber gap fillers are very soft absorber pads with low deflection force upon compression. This soft, conformable absorber eliminates unwanted signal noise while also acting as a gap filler that reduces further coupling.

The Softzorb product family can be used to fill the air gap between electronic components and structures to reduce coupling without stressing components or structures. 

Softzorb MCS

Softzorb MCS grade address 1-18 Ghz frequency band . It can be used in commercial Datacom equipment such as optical transceiver cavities where space is at a premium and superior absorbing capabilities are required

Softzorb GDS

Softzorb GDS grade address 18-35 Ghz frequency band. This softer material can be used as an interface to fill the gap and/or balance stack up tolerances challenges without stressing the components neither the structure of the equipment in growing high frequency application like high speed connector and high data datacom equipment 

Features and Benefits

• Useful in challenging compact and high tolerances stack up applications
• Conformable for optimum cavity fill
• Low deflection force
• High power performance and high magnetic loss

Website Link:  Product Catalog Page