REV Mecanum Wheels are steel plates with rollers supported by ball bearings allowing for the perfect combination of wheel rigidity and roller movement. Included in the set of wheels are Universal Hex Adapter making mounting to 5mm hex shaft easy.

This Ball Joint is perfect for creating linkage systems within the REV 15mm System.The Ball Joint can either be paired with its male counterpart (REV-49-1561) to create short linkage arms or with M3 threaded rod and a second female ball joint for longer distances.

This Ball Joint is perfect for creating linkage systems within the REV 15mm System. It features a male M3 thread with an M3 clearance hole at the ball.The Ball Joint can either be paired with its female counterpart (REV-49-1561) to create short linkage arms or threaded into the ends of the REV 15mm Extrusion.

The REV Servo Shaft Adapter attaches to the servo spline, of any 25T output servo, like a common servo horn and accepts a 5mm hex shaft on the opposite end.

Eccentric bushings are used to hold our V-Groove Bearings (REV-29-1014) for linear motion applications. The hole is drilled off-center of the bearing axis so by rotating the bushing on its mounting bolt, the clearance between the wheel and track can be adjusted. This allows users to decide how tight or loose they would like to tune their linear motion system.

Make driving linear motion easy with the 22 Tooth Plastic Right Angle Rack Gear. Mount the rack gear to a slot in either the REV 15mm Extrusion or REV Channel while using any of the REV Plastic Gears to drive motion.

This is the End Cap which is apart of the 15mm Linear Motion Kit V2.

This is the String Cover which is apart of the 15mm Linear Motion Kit V2.

This is the Flag Style Linear Motion Wiper which is apart of the 15mm Linear Motion Kit V2.

This are the Double Sided Sliders which are apart of the 15mm Linear Motion Kit V2.