Based on the official Bosch Rexroth technical documentation for the CDM1 series, a mounting block with the exact designation CLTM is not a standard accessory for this cylinder range. The official catalog for the CDM1 cylinder series, which lists all standard mounting types and accessories, does not include CLTM.The product code CLTM that you are using appears to be a designation for a support bracket used in linear motion systems, which is available from the manufacturer MISUMI, not from Bosch Rexroth as a hydraulic cylinder accessory.🔍 What the Search Results ShowFor the CDM1 mill-type cylinder, the official Bosch Rexroth catalog lists a comprehensive range of standard accessories, including fork-type mounting blocks (CLCA) and self-aligning clevises (CGKD), but there is no mention of a CLTM mounting block.💡 How to Find the Correct AccessoryTo find the correct mounting block for your CDM1 cylinder, follow these steps:Verify the Correct Product Code: The "CLTM" designation is not a Rexroth hydraulic accessory code. The correct mounting blocks for the CDM1 series are from the CLCA and CLCD series.Consult the Official Documentation: The most reliable source of information is the official Bosch Rexroth catalog RE 17329, which contains complete details on all available mounting elements and accessories.

Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (20).

Based on the official Bosch Rexroth technical catalog for the CDM1 cylinder series, the CLTM designation for a mounting block was not found as a standard accessory. The correct part for the CDM1 cylinder range is from the CLCA series of fork-type mounting blocks .For your cylinder with a 20 mm hole diameter, piston rod end G, and a piston rod diameter of 14 mm, the compatible mounting block would be a CLCA 12 . This is a clampable clevis bracket manufactured to ISO 8132 standards .✅ Correct Part Identification: CLCA 12For the CDM1 cylinder series, the table for fork-type mounting blocks shows that the CLCA 12 is the correct accessory for a 14 mm piston rod (and a 25 mm piston) .Parameter SpecificationDesignation CLCA 12Material Number R900542861 Nominal Force 8,000 N Pin Diameter (CK H9) 12 mm For Piston Rod Diameter (d) 14 mm Weight 0.45 kg

Based on the available Bosch Rexroth documentation, a mounting block with the exact designation CLTM is not a standard accessory for the CDM1 cylinder series .The official technical catalog for the CDM1 series (RE 17329) lists a comprehensive range of standard mounting accessories, including fork-type mounting blocks (CLCA), self-aligning clevises (CGKD), and pins, but there is no mention of a CLTM mounting block . The CLTM designation found in your query may refer to a support bracket or a product from a different manufacturer, not a Rexroth hydraulic cylinder accessory.🔍 Correct Accessories for CDM1For the CDM1 cylinder series, the correct fork-type mounting blocks are from the CLCA series. These are manufactured to ISO 8132 standards .Based on the CDM1 accessory table, here is the recommended part for your specifications :Parameter SpecificationDesignation CLCA 16For Piston Rod Diameter (d) 18 mm (Piston Rod End G) or 22 mm (Piston Rod End H)Material Number R900542862Nominal Force 12,500 NPin Diameter (CK H9) 16 mmWeight 1.0 kgNote: The CLCA 16 is the correct fork-type mounting block for CDM1 cylinders with piston rod diameters of 18 mm and 22 mm . Your query specified a hole diameter (CR) of 20 mm, but the standard Rexroth accessory for this rod size uses a 16 mm pin. If a 20 mm hole is required, the cylinder rod end configuration may be different.

Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (50).

Based on the official Bosch Rexroth documentation, the CLTM model code you've provided does not match the standard part numbers for the CDM1 cylinder series. The correct equivalent is a fork-type mounting block from the CLCA series .✅ Correct Part Identification: CLCA 50For a CDM1 cylinder with a 56 mm piston rod diameter (Rod End G) or a 70 mm rod diameter (Rod End H, with a 100 mm piston), the correct mounting block is the CLCA 50 . This clevis bracket is manufactured according to ISO 8132, form B .Parameter Specification for CLCA 50Designation CLCA 50 Material Number R900542867 Nominal Force 125,000 N Pin Diameter (CK H9) 50 mm Weight (approx.) 15.5 kg 🔍 Explanation of Product Code DiscrepancyThe CLTM designation is not a standard Rexroth code for hydraulic cylinder accessories found in the official CDM1 catalog . The correct mounting block series for this cylinder family is CLCA .

Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (63).

Based on the official Rexroth technical documentation for the CDM1 series, a mounting block with the exact designation CLTM is not a standard accessory for this cylinder range .The CLTM designation found in your query may refer to a support bracket or a product from a different manufacturer, not a Rexroth hydraulic cylinder accessory .✅ Correct Accessory: Fork-type Mounting Block CLCAFor the CDM1 cylinder with piston rod diameters of 70 mm (Rod End G) and 90 mm (Rod End H, with a 125 mm piston), the correct fork-type mounting block from the official catalog is the CLCA 63 .This component is a clampable clevis bracket manufactured to ISO 8132, form B standards .Here are the key specifications for this block :Parameter Specification for CLCA 63Designation CLCA 63Material Number R900542868Nominal Force 200,000 N (200 kN)Pin Diameter (CK H9) 63 mmWeight (approx.) 27.5 kg

Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (100).

Based on the Rexroth technical catalog for the CDM1 series, a mounting block with the exact designation CLTM is not listed. The correct standard accessory for your cylinder is a fork-type mounting block from the CLCA series .For a CDM1 cylinder with a 110 mm piston rod diameter (Rod End G) or a 140 mm rod diameter (Rod End H with a 200 mm piston), the correct mounting block is the CLCA 100. This is a clampable clevis bracket manufactured to ISO 8132, form B .Here are its key specifications:Parameter Specification for CLCA 100Designation CLCA 100Nominal Force 500,000 N (500 kN)Pin Diameter (CK H9) 100 mmWeight (approx.) On requestMaterial Number Not listed; contact RexrothThis information comes from the official CDM1 accessory table, which lists the CLCA series as the standard fork-type mounting block for this cylinder range . The CLTM designation you mentioned was not found in the available Rexroth documentation for hydraulic cylinder accessories.

Based on the official Bosch Rexroth technical documentation for the CDM1 series, a mounting block with the exact designation CLTM is not a standard accessory for this cylinder range.For your specific CDM1 cylinder with a 140 mm piston rod diameter, the correct fork-type mounting block is the CLCA 125, which is the standard accessory type used with this cylinder series.✅ Correct Part Identification: CLCA 125For a CDM1 cylinder with a 140 mm piston rod diameter (Piston Rod End G), the corresponding model from the official catalog is the CLCA 125.This is a clevis bracket manufactured to ISO 8132, form B standards.Here are its key specifications from the Rexroth dimension tables:Parameter Specification for CLCA 125Designation CLCA 125Material Number On request (not listed in the standard table)Nominal Force 800,000 NPin Diameter (CK H9) 125 mmWeight On requestThis data is directly from the official Rexroth CDM1 catalog, which states that for a piston rod diameter of 140 mm, the mounting block required is the CLCA 125. The "hole diameter" you specified (125 mm) matches the pin diameter (CK H9) of this exact block.

The cylinder configuration you specified, a CST3 series tie-rod cylinder with a 100 mm bore and an 800 mm stroke, is a standard and valid combination according to the official Rexroth documentation.📊 Product & SpecificationsModel Series: CST3...Z (Differential cylinder with position measurement system) .Mounting Style (ME5): Rectangular flange at the cylinder head .Bore Diameter (ØAL): 100 mm .Stroke Length: 800 mm. The series supports strokes up to 3000 mm , and an 800 mm stroke is within the permissible range .⚙️ Ordering Code StructureThe Rexroth ordering code for this cylinder follows the structure CST3ME5/100//800... . An example similar to your specification is CST3ME5/100/45/800... . For a 100 mm bore, standard piston rod diameters (ØMM) are 45 mm or 70 mm .

Tie Rod Cylinder With Position Measuring Systems CST3 - MS2.

The cylinder configuration you specified—a CST3 series tie-rod cylinder with a 100 mm bore and an 800 mm stroke—is a standard and valid combination.📊 Product & SpecificationsModel Series: CST3...Z (Differential cylinder with position measurement system) .Mounting Style (MS2): Foot mounting .Bore Diameter (ØAL): 100 mm .Stroke Length: 800 mm. The series supports strokes up to 3000 mm, and your 800 mm stroke is within the permissible range .⚙️ Ordering Code StructureThe Rexroth ordering code for this cylinder follows the structure CST3MS2/100//800... . For a 100 mm bore, standard piston rod diameters (ØMM) are 45 mm or 70 mm .

The cylinder configuration you have specified—a CST3 series tie-rod cylinder with a 100 mm bore, 800 mm stroke, and MT4 center trunnion mounting—is a standard and valid combination, as confirmed by Bosch Rexroth technical documentation.For a 100 mm bore, standard piston rod diameters (ØMM) are 56 mm or 70 mm. The "MT4" indicates a trunnion mount located in the center of the cylinder, allowing it to pivot.📊 Key Specifications & Dimensions for 100mm Bore (CST3 MT4)The table below provides the relevant technical specifications derived from the official Rexroth catalog.Parameter Specification for 100mm Bore / MT4 MountingModel Series CST3...Z (Differential cylinder with position measuring system)Mounting Type MT4 (Center trunnion)Nominal Pressure 160 barBore Diameter (ØAL) 100 mmPiston Rod Diameter (ØMM) 56 mm or 70 mmStroke Length 800 mm (max up to 3000 mm)Trunnion Diameter (QTD f8) 50 mmTrunnion Length (TK max) 70 mmPiston Rod Thread (KK) M33 x 2 (for 56 mm rod) / M33 x 2 (for 70 mm rod)Port Thread (EE) G 3/4Retracted Length (ZK) 248 mm⚙️ Ordering Code StructureThe Rexroth ordering code follows a specific structure. For your specifications, the cylinder code would follow this pattern:CST3MT4/100//800...You must specify the piston rod diameter (choose from 56 or 70 mm) and other options like cushioning or seals to complete the order code.