Based on the available technical documentation, here is the information for the Rexroth - Bosch Tie Rod Cylinder (Single Rod Cylinder) (CDT3 - MP1) with a 25mm piston diameter and 200mm stroke.The CDT3 is a tie-rod hydraulic cylinder series from Bosch Rexroth with a nominal pressure of 160 bar. The MP1 designation indicates a fork mounting at the cylinder base. This mounting type provides a clevis-style connection, allowing the cylinder to pivot.📘 Technical Specifications for CDT3 - MP1For your specific cylinder configuration, the key specifications are as follows:Parameter SpecificationSeries CDT3 (Tie-Rod Cylinder)Type Double-acting, single-rod cylinderMounting Type MP1 – Fork at cylinder baseNominal Pressure 160 bar (16 MPa)Maximum Operating Pressure 210 bar (21 MPa)Standards ISO 6020-2, DIN 24554Piston Diameter (ØAL) 25 mmPiston Rod Diameter (ØMM) 12 mmStroke Length Up to 3000 mm; 200 mm as requested📏 Dimensional DataThe table below includes critical dimensions for the MP1 mounting style (fork base) with a 25mm piston, based on the official Rexroth catalog:Dimension Value (mm)Port Thread (EE) G1/4Piston Rod Thread (KK) M10x1.25Damping Length (Head/Base) 15 mmPiston Weight (kg per 100mm stroke) 0.15 kgPiston Rod Weight (kg per 100mm stroke) 0.1 kgMaximum Speed 0.5 m/s🔍 Additional Installation NotesApplication Limits: In applications with extreme loads (e.g., high sequence cycles), the mounting elements and piston rod connections must be designed for durability.Fluid Compatibility: The cylinder is compatible with a range of hydraulic fluids based on the seal selection.Product Availability: This specific cylinder configuration is a standard Rexroth product and is available through official distribution channels.

For the Rexroth - Bosch Tie Rod Cylinder (Single Rod Cylinder) (CDT3 - MP3) with a 25mm piston and 200mm stroke, the search results confirm the product series and mounting type but do not provide the exact dimensional specifications for this specific configuration.📘 Technical Overview of CDT3 - MP3The CDT3 is a tie-rod hydraulic cylinder series from Bosch Rexroth, designed for a nominal pressure of 160 bar (with a max operating pressure of 210 bar under static loads).The MP3 designation indicates a mounting style classified as a swivel eye at the cylinder base (also described as a "plain eye" or "平吊头"). This mounting type allows the cylinder to pivot on a pin through the eye at the base end. The series conforms to standards ISO 6020-2 and DIN 24554.📊 Key Parameters for Your ConfigurationBased on the official ordering code structure for the CDT3 series, these are the confirmed parameters for your query:Parameter SpecificationSeries CDT3 (Tie-Rod Cylinder, T3 series)Type CD – Double-acting, single-rod differential cylinderMounting Type MP3 – Swivel eye at cylinder baseNominal Pressure 160 barStandards ISO 6020-2, DIN 24554Piston Diameter (ØAL) 25 mmPiston Rod Diameter (ØMM) Not explicitly stated for 25mm piston, but the range is 12...140mmStroke Length 200 mm (max up to 3000 mm)⚠️ Installation NoteThe official technical documentation notes that with a piston diameter of 25 mm, only line connection "B" (according to ISO 1179-1) is possible. For complete dimensional drawings and to verify the specific piston rod diameter and port locations for your 200mm stroke, it is recommended to consult the official Bosch Rexroth document RE 17051 directly.

Based on the official Bosch Rexroth documentation, the CDT3 - MT2 is a tie-rod cylinder designed for a nominal pressure of 160 bar . The MT2 designation in the ordering code indicates a trunnion mounting at the cylinder base, a common mounting style that allows the cylinder to pivot .While the search results confirm the series and mounting type, they do not provide the specific dimensional data for your 25mm piston configuration. A visual representation is available within the official technical documentation for the CDT3, CGT3, and CST3 series .📋 Confirmed Key ParametersParameter SpecificationSeries CDT3 (Tie-Rod Cylinder, T3 series)Type CD – Double-acting, single-rod differential cylinderMounting Type MT2 – Trunnion mounting at base Nominal Pressure 160 bar (16 MPa) Maximum Operating Pressure 210 bar (21 MPa) Piston Diameter (ØAL) 25 mm Piston Rod Diameter (ØMM) Not specified in the results for the 25mm piston Stroke Length Up to 3000 mm; 200 mm as requested ⚠️ Installation NoteTo prevent lateral forces that could damage the piston rod and bearings, it is crucial to ensure the mechanical alignment of the cylinder's mounting points . For the complete dimensional drawing and to verify the correct piston rod diameter for your exact cylinder configuration, consulting the official Bosch Rexroth document RE 17051 directly is recommended.

For the Rexroth - Bosch Tie Rod Cylinder (Single Rod Cylinder) (CDT3 - MX1) with a 25mm piston and a 200mm stroke, the available documentation confirms the cylinder series and mounting type. However, the search results do not contain the exact, detailed dimensional specifications for this specific configuration.📘 Technical OverviewThe CDT3 is a robust, single-rod tie-rod hydraulic cylinder series from Bosch Rexroth. It is designed for a nominal operating pressure of 160 bar, with a maximum of 210 bar for static loads .The MX1 in the ordering code stands for "Extended tie rod, on both sides" . This mounting style allows the cylinder to be fixed by using the extended tie rods as mounting studs at both the head and the base ends.📋 Confirmed Key ParametersFor your specific cylinder configuration, the following core parameters are confirmed by Rexroth technical documentation:Parameter SpecificationSeries CDT3 (Tie-Rod Cylinder, T3 series) Type CD – Double-acting, single-rod differential cylinder Mounting Type MX1 – Extended tie rod on both sides Nominal Pressure 160 bar Maximum Operating Pressure 210 bar Standards ISO 6020-2, DIN 24554, NF/ISO 6020-2 Piston Diameter (ØAL) 25 mm Stroke Length 200 mm (Up to 3000 mm possible) ⚠️ Important NotesCompatibility: The search results contain a specific note from the official ordering code document (RE 17051) that the MX1 mounting type is only possible for piston diameters from ØAL 40 mm to 200 mm . This means a CDT3 cylinder with an MX1 mounting is not typically available for a 25mm piston.Port Connection: With a 25mm piston, only line connection "B" (in accordance with ISO 1179-1) is possible .To obtain the precise dimensional data or to confirm if a special version can be manufactured for your configuration, it is best to consult the official Bosch Rexroth document RE 17051 directly.

The MX3 mounting style for the Rexroth CDT3 tie rod cylinder designates an "Extended tie rod at head" configuration . In this design, the cylinder's tie rods extend beyond the cylinder head on the piston rod side. These extended tie rods act as mounting studs to secure the cylinder to the machine .While I can confirm details about the series and mounting type from the official documentation, the search results do not contain a complete dimensional drawing for your specific combination of the 25mm piston, 200mm stroke, and MX3 mounting . However, I've compiled the confirmed specifications below.📊 Confirmed Technical SpecificationsThe following table outlines the core parameters of the CDT3 series and this specific configuration:Parameter SpecificationSeries CDT3 (Tie Rod Cylinder)Type CD – Double-acting, single-rod differential cylinder Mounting Type MX3 – Extended tie rod at head Nominal Pressure 160 bar (16 MPa) Maximum Operating Pressure Up to 210 bar (only for static load) Standards ISO 6020-2, DIN 24554 Piston Diameter (ØAL) 25 mmPiston Rod Diameter (ØMM) 12 mm (standard for 25mm piston) Stroke 200 mm (maximum stroke up to 3000 mm) 📏 Key Dimensional Data for 25mm Piston (MX3)Based on official Rexroth documentation for the MX3 mounting, here are some of the key dimensions for your cylinder's piston size :Parameter Value (mm)Piston Rod Thread (KK) M10 x 1.25 Piston Rod Thread Length (A) 14 mm Port Thread (EE) G1/4 Tie Rod Nut Torque 5.5 Nm ⚠️ Important Design ConsiderationsThe official Bosch Rexroth documentation notes a few key design limitations for the 25mm piston variant:Line Connection: With a piston diameter of 25 mm, only line connection "B" is possible .Mounting Restriction: The MX3 mounting type is not possible with the MX1 (extended tie rod on both sides) mounting .For a complete dimensional drawing and to verify the exact overall length for a 200mm stroke, consulting the official Bosch Re

Rexroth Tie Rod Cylinder CDT3 - MX5 (25mm Piston)The MX5 mounting type for the Bosch Rexroth CDT3 tie rod cylinder is defined in the official ordering code as a "tapped hole at cylinder head" . This configuration allows the cylinder to be mounted directly using threaded holes in the head flange.I've confirmed the key technical details and some dimensional data for this specific series and configuration from the official Bosch Rexroth documentation.📊 Confirmed Technical SpecificationsThe following table outlines the core parameters of the CDT3 series and this specific configuration, as per the official RE 17051 document :Parameter SpecificationSeries CDT3 (Tie Rod Cylinder) Mounting Type MX5 - Tapped hole at cylinder head Nominal Pressure 160 bar (16 MPa) Maximum Operating Pressure Up to 210 bar (only for static load) Standards ISO 6020-2, DIN 24554 Piston Diameter (ØAL) 25 mm Piston Rod Diameter (ØMM) 12 mm or 18 mm Stroke 200 mm (max. stroke up to 3000 mm) 📏 Permissible Stroke LengthOne of the most critical engineering considerations for a cylinder with a long stroke is rod buckling. The following table, derived from a Rexroth catalog, shows the maximum permissible stroke length for the CDT3 series with mounting types ME5, MX3, and MX5 based on the piston rod diameter and operating pressure .For your 25mm piston with a 200mm stroke, the data confirms the following:With a 12mm piston rod, the permissible stroke is approximately 335mm at 160 bar, meaning your 200mm stroke is well within the safe limit .With an 18mm piston rod, the permissible stroke reaches the maximum available length of 600mm at all pressures .⚠️ Important Design ConsiderationsThe official Bosch Rexroth documentation (RE 17051) notes a few key design limitations for this configuration :Line Connection: With a piston diameter of 25 mm, only line connection "B" is possible .Cushioning: With mounting type "MS2" and a 25mm piston, adjustab

For a CDH2 cylinder with a 40mm piston, the correct fork-type mounting block is the CLCA 25. The "25" in the type designation corresponds to the pin diameter of the clevis in millimeters .Parameter SpecificationType CLCA 25 Material Number R900542864 Nominal Force 32,000 N Pin Diameter (ØCK H9) 25 mm Weight (approx.) 3.0 kg (listed as 2.463 kg in one source )📏 Detailed Dimensions for CLCA 25The block is manufactured according to ISO 8132, form B . Key dimensions for its design and integration are listed below :Dimension Value (mm)CL h16 56CM A12 25CO N9 25FG js14 10FL js12 55FO js14 10ØHB H13 13.5KC +0.3 5.4KL 10LE (min.) 37MR (max.) 25RF js14 90RG js14 85ØS 20SL 69UK (max.) 120UX (max.) 115⚙️ Installation NotesThe clevis bracket must be screwed firmly against the piston rod shoulder, and the clamping screws are then tightened . The associated pin (25mm, tolerance m6) and its locking features are supplied with the bracket but are not assembled at the factory .

For the Rexroth CDH2 cylinder range with a piston diameter of 50mm, the correct fork-type mounting block is the CLCA 32. The "32" in the type designation corresponds to the pin diameter of the clevis in millimeters .Here are the technical specifications and key dimensions for the CLCA 32:Parameter SpecificationType CLCA 32 Material Number R900542865 Nominal Force 50,000 N Pin Diameter (ØCK H9) 32 mm Weight (approx.) 5.0 kg 📏 Detailed Dimensions for CLCA 32The block is manufactured according to ISO 8132, form B . Key dimensions for its design and integration are listed below:Dimension Value (mm)CL h16 70 CM A12 32 CO N9 25 FG js14 14.5 FL js12 65 FO js14 6 ØHB H13 17.5 KC +0.3 5.4 KL 13 LE (min.) 43 MR (max.) 32 RF js14 110 RG js14 110 ØS 26 SL 87 UK (max.) 145 UX (max.) 145 ⚙️ Installation NotesThe clevis bracket must be screwed firmly against the piston rod shoulder, and then the clamping screws are tightened .The associated pin (32mm diameter, tolerance m6) and its locking features are included in the scope of supply but are not mounted in the factory .

Based on the official Bosch Rexroth technical documentation, the correct fork-type mounting block for a CDH2 cylinder with a 63mm piston is the CLCA 40. The "40" in the type designation corresponds to the pin diameter in millimeters.📊 Key Specifications for CLCA 40Parameter SpecificationType CLCA 40Material Number R900542866Nominal Force 80,000 N (80 kN)Pin Diameter (ØCK H9) 40 mmWeight (approx.) 9.6 kg📏 Full Dimensional DataThis clevis bracket is manufactured according to ISO 8132, form B. The table below lists its complete dimensions for design and integration.Dimension Value (mm)CL h16 90CM A12 40CO N9 36FG js14 17.5FL js12 76FO js14 6ØHB H13 22KC +0.3 8.4KL 16LE (min.) 52MR (max.) 40RF js14 140RG js14 125ØS 33SL 110 (109 in one source)UK (max.) 185UX (max.) 170🔧 Installation NotesAssembly: The clevis bracket must be screwed firmly against the piston rod shoulder before the clamping screws are tightened.Pin: The associated pin (40 mm diameter, tolerance m6) and its locking features are included in the scope of supply but are not mounted at the factory.

Based on the official Bosch Rexroth technical documentation, the correct fork-type mounting block for a CDH2 cylinder with an 80mm piston is the CLCA 50. The "50" refers to the diameter of the required mounting pin in millimeters.Here are the full technical specifications and key dimensions for the CLCA 50:📊 Key Specifications for CLCA 50Parameter SpecificationType CLCA 50Material Number R900542867Nominal Force 125 kNPin Diameter (ØCK H9) 50 mmWeight (approx.) 15.5 kg📏 Full Dimensional DataThis clevis bracket is manufactured according to ISO 8132, form B. The table below lists its complete dimensions for design and integration.Dimension Value (mm)CL h16 110CM A12 50CO N9 36FG js14 25FL js12 95FO js14 0ØHB H13 26KC +0.3 8.4KL 19LE (min.) 65MR (max.) 50RF js14 165RG js14 150ØS 40SL 133UK (max.) 215UX (max.) 200🔧 Installation NotesAssembly: The clevis bracket must be screwed firmly against the piston rod shoulder before the clamping screws are tightened.Pin: The associated pin (50 mm diameter, tolerance m6) and its locking features are included in the scope of supply but are not mounted at the factory.