The cylinder you are looking for is a HVBS type, which is a single rod, differential cylinder without a sensor rod.Based on the official Rexroth documentation, here are the specifications for your requested cylinder:Ordering Code BreakdownComponent Designation/Value DescriptionHVBS Type of Cylinder Differential cylinder (single rod, without sensor rod)03 Range Piston diameter 32 mm and piston rod diameter 18 mmA Stroke Code Standard stroke length of 5 mmK14 Electrical Connection Connector according to DIN EN 175301-803, without mating connector. This is a standard option from the ordering code.The A1 designation you requested is not a standard code. The official table shows the stroke code is simply A for 5 mm. The K14 is added for the electrical connection type.Key Technical SpecificationsNominal Pressure: 200 bar (20 MPa)Standard: CNOMO 05.07.65 to 05.07.70Piston Diameter (ØAL): 32 mmPiston Rod Diameter (ØMM): 18 mmStroke: 5 mmEnd Position Cushioning: WithoutPiston Rod End Thread (KK): M12 x 1.25

Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=12 mm.

Based on the official Bosch Rexroth documentation, the self-aligning clevis (swivel head) you're looking for is the CGK 12, which has an internal bush diameter (CN) of 12 mm .This is confirmed to be the correct accessory for a CD70 cylinder with a 32 mm piston diameter .✅ Product SpecificationsThe table below lists the key specifications for the CGK 12 swivel head, as detailed in the Rexroth technical data sheets .Parameter SpecificationType CGK 12Material No. R900001327Internal Bush Diameter (CN) 12 mmThread (KK) M12Weight 0.1 kgStatic Load Rating (C₀) 24.5 kNMax. Admissible Load (Fadm) 8.1 kNMisalignment Angle (Z) 10° - 11°🔧 Compatibility & NotesThe CGK 12 is specifically designed for the CD70, CG70, CD210, and CG210 cylinder series .📌 Installation Note: The self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque .

Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=35 mm.

The self-aligning clevis meeting your specifications—a 35 mm internal bush diameter, for the CD70/CD210 cylinder range, with an 80 mm piston diameter—is the CGK 35.✅ Product ConfirmationThe model CGK 35 is the correct choice. The official Rexroth documentation designates it for the CD210 and CG210 series . It features an internal bush diameter (CN) of 35 mm .Specification DetailType CGK 35Material No. R900012486Internal Bush Diameter (CN) 35 mmThread (KK) M36 x 3Weight (approx.) 1.4 kgStatic Load Rating (C₀) 146 kNMax. Admissible Load (Fadm) 48.2 kNMisalignment Angle (Z) 6°While the primary table lists the CGK 35 for the CD210/CG210 series , the second row of the table shows that the same combination (80 mm piston with a 45 mm rod) for the CD70/CG70 series uses the CGK 30 . It's recommended to verify which cylinder series you are using. If it's CD70, the model should be CGK 30; if it's CD210, the model is CGK 35.

Based on the official Bosch Rexroth technical documentation, here is the compatibility information for the CLEA (10) eye bearing block and the CCKA fork clevis for the specified cylinder ranges .✅ Product Compatibility & SelectionCLEA (10) Eye Bearing BlockThe CLEA (10) eye bearing block is listed as an accessory for the CD70/CG70 and CD210/CG210 cylinder series . The dimensional data for this accessory is shown below.For Cylinder Series Type Material No. Pin Diameter (ØCK H7) EM h13 FL h12 ØHB H13 Weight (kg)CD70, CG70 (ØAL 32, 40, 50 mm)CD210, CG210 (ØAL 16, 40, 16 mm) CLEA 10 R900318516 12.7 20 28.5 11 0.4 CCKA Fork ClevisFor the CCKA fork clevis, the correct model depends on the piston rod diameter (d). The compatibility data from the dimension tables is as follows :Piston Rod Diameter (d) Fork Clevis CCKA Material No. Pin Diameter (ØCK H7) Thread (KK) Weight (kg)16 mm CCKA 10 R900318486 12.7 M10 x 1.5 0.218 mm CCKA 10 R900318488 19.1 M16 x 1.5 1.0 Note on Compatibility: The CLEA (10) bearing block and the CCKA fork clevis are separate components. The "Mounting Style G" you mentioned is not explicitly defined in the available search results. You will need to select the CLEA (10) based on your cylinder's piston diameter (ØAL) and the CCKA based on your piston rod diameter (ØMM) .

Based on the available Bosch Rexroth technical documentation, a self-aligning clevis with the specific model code CGKM matching your requested size and internal bush diameter (DN=25) was not found. The designation CGKD is the standard type used for clampable swivel heads across the relevant cylinder families.✅ Correct Part Identification: CGKD 25The search results confirm that the correct self-aligning clevis for a 25 mm internal bush diameter (DN/CN H7) is the CGKD 25 for the CDM1 and CDL1 cylinder ranges.This is verified in the official dimension tables for the CDM1 / CGM1 / CSM1 series, where the CGKD 25 is listed with an internal bush diameter (CN H7) of 25 mm . The same model and dimensions are also listed for the CDH2 / CGH2 series , confirming it as a standard component.📊 Specifications for CGKD 25Here are the key specifications for the CGKD 25 self-aligning clevis:Parameter SpecificationType CGKD 25Material Number R900323332 Internal Bush Diameter (CN H7) 25 mm Nominal Force 32,000 N Thread (KK) M20 x 1.5 Clamping Screw M8 x 20 (ISO 4762-10.9) Tightening Torque (Mₐ) 25 - 30 Nm Weight (m) 0.65 kg Misalignment Angle (Z) 2° 📌 Installation Note: As noted in the documentation, the self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque .

Based on the available search results, a self-aligning clevis with the CGKM designation you used was not found. However, the correct model for an 80 mm internal bush diameter for the CDM1 / CDL1 cylinder ranges is the CGKD 80 .✅ Correct Part Identification: CGKD 80This is confirmed by the official dimension tables for both the CDM1/CGM1/CSM1 and CDH2/CGH2 series, where the CGKD 80 is listed with an internal bush diameter (CN H7) of 80 mm .📊 Specifications for CGKD 80Here are the key specifications for the CGKD 80 self-aligning clevis :Parameter SpecificationType CGKD 80Material Number R900322700Internal Bush Diameter (CN H7) 80 mmNominal Force 320,000 NThread (KK) M64 x 3Clamping Screw M20 x 50 (ISO 4762-10.9)Tightening Torque (Mₜ) 410 NmWeight (m) 15 kgMisalignment Angle (Z) 4°📌 Installation Note: As noted in the documentation, the self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque .

The Rexroth CGH1 is a robust mill-type double rod cylinder designed for demanding industrial applications. It operates at a nominal pressure of 250 bar (25 MPa) and meets the requirements of standards like ISO 3320 .The MF3 mounting style specifies a round flange at the cylinder head . For your configuration of a 63 mm bore and 450 mm stroke, the standard piston rod diameter options are 36 mm or 45 mm .📊 Technical Specifications & Dimensions for 63mm Bore (CGH1 MF3)The table below summarizes the key performance data and critical dimensions for your cylinder, based on official Rexroth documentation .Parameter Specification for CGH1 MF3 (63mm Bore)Series CGH1 (Mill Type Double Rod Cylinder)Mounting Style MF3 (Round flange at head)Nominal Pressure 250 bar (25 MPa)Piston Diameter (ØAL) 63 mmPiston Rod Diameter (ØMM) 36 mm or 45 mmStroke Length 450 mm (Max. up to 6000 mm)Key Dimensions (in mm)Dimension ValuePiston Rod Thread (KK) M28x1.5 (for 36mm rod) / M30x2 (for 45mm rod)Port Thread (EE) G3/4Retracted Length (ZP) Determined by stroke and cushioning🔧 Ordering Code ReferenceThe Rexroth ordering code for this cylinder follows the structure CGH1MF3/63//450A3X/B11... . An example of a complete code is CGH1MF3/63/36/450A3X/B11CADMW, where 63 is the bore, 36 is the rod diameter, and 450 is the stroke in millimeters .Note on Application Limits: The specified operating pressures and force values are only valid for shock-free applications. With extreme loads (e.g., high sequence cycles), mounting elements and piston rod connections need to be designed for durability .

The Rexroth CDT3 MX2 you specified is a tie-rod cylinder designed with extended tie rods at the cylinder base, which serve as mounting studs. This is a standard configuration within the well-documented CDT3 series, which conforms to ISO 6020-2 and DIN 24554.📊 Technical Specifications for CDT3 MX2 (80mm Bore)Your specified cylinder with an 80 mm bore and 50 mm stroke is a valid standard option. The key specifications for this series are confirmed in the official Rexroth documentation.Series: CD – Single-rod hydraulic cylinder, T3 StyleMounting: MX2 – Extended tie rod at cylinder baseNominal Pressure: 160 bar (16 MPa)Maximum Operating Pressure: 210 bar (static load only)Piston Diameter (ØAL): 80 mmStroke Length (S): 50 mm (Maximum up to 2700-3000 mm)Piston Rod Diameter (ØMM): Standard options for an 80 mm bore are 36 mm, 45 mm, or 56 mmStandards: ISO 6020-2, DIN 24554, NF/ISO 6020-2⚙️ Ordering Code ReferenceThe ordering code follows the structure CDT3MX2/80//50.... You must specify the piston rod diameter (e.g., 36, 45, or 56 mm) and other options like cushioning or seals.A sample product listing shows the complete code CDT3MX2/80/56/50F11/B11HHUMWW, confirming this is a standard model with a 56 mm rod.

Proportional Flow Control Valve (Rexroth - BOSCH). - 2-Way Proportional Throttle Valve Type 2FRE.

Based on the search results, the Bosch Rexroth valve that matches your specified parameters is the 2FRE 6 A-2X/16QK4MV .This valve is a 2-way proportional throttle valve (Type 2FRE) with a nominal size of 6. It features a progressive flow characteristic up to 16 L/min and is the version with external closing of the pressure compensator ("A") to suppress start-up jumps .The full ordering code breaks down as follows :2FRE: 2-way proportional flow control valve6: Nominal size 6A: With external closing of the pressure compensator (suppression of start-up jump)2X: Component series 20 to 2916Q: Progressive characteristic, up to 16 L/minK4: Electrical connection with component plug (without mating connector)M: Without check valveV: FKM sealsThe Rexroth material number for this valve is R900937864 .

According to the official Rexroth documentation for the CNOMO VBH series, the correct ordering code for your cylinder is HVBD 03 A ....Here is a breakdown of the ordering code to confirm your specifications:Ordering Component Code DescriptionHVBD Type Differential cylinder with a sensor rod for position measurement03 Range Piston diameter 32 mm, Piston rod diameter 18 mmA Stroke Code Standard stroke length of 5 mmTechnical SpecificationsThe cylinder you have configured is a compact tie-rod design built to CNOMO standards, with a nominal pressure of 200 bar (20 MPa). It is designed for applications where installation space is very limited, for short strokes, and low speeds.