User Library

Results 3211-3220 of 3943
Results per page:
Name
Description
SEStationary Pull Back Chuck For Internal GrippingMaster jaw can gripped the workpiece directly when the gripping diameter is small.Can cooperate with the airtight detection, and axial position confirm, suitable for the precision of large length size process.With high precision and stability that chuck suitable for end process.No need to add the stationary cylinder additionally.
Category
Contributed by
Company
Autogrip machinery Co Ltd
Configurations?
No
Downloads
9
Added on
1 Aug, 2017
Name
Description
SDStationary Pull Back ChuckWith workpiece can do radial clamp and axial pull-down at the same time, which able to closer surface of the chuck.Can cooperate with the airtight detection, and axial position confirm, suitable for the precision of large length size process.The body with heat treatment and the organization of cylinder pull-down, and fine boring, which guarantee to the high clamping precision and durableness, it’s suitable for heavy duty machining.
Category
Contributed by
Company
Autogrip machinery Co Ltd
Configurations?
No
Downloads
9
Added on
1 Aug, 2017
Name
Description
3V-APower Chuck for Vertical LatheIt's a WEDGE-HOOK type 3-jaw high speed power chuck.Sealed against swarf, chips and coolant, suitable for vertical lathe.
Category
Contributed by
Company
Autogrip machinery Co Ltd
Configurations?
No
Downloads
69
Added on
31 Jul, 2017
Name
Description
3U/3U-KPull Lock Power Chuck3U: It's a Pin-Arbor Draw Down type 3-jaw thru-hole power chuck.3U-K: It's a Pin-Arbor Draw Down type 3-jaw non-thru-hole power chuck.High radial gripping force and high accuracy.Suitable for heavy machining.
Category
Contributed by
Company
Autogrip machinery Co Ltd
Configurations?
No
Downloads
30
Added on
31 Jul, 2017
Name
Description
4TFour-Jaw Two Motion Type Power ChuckIt's a CRANK type with two pairs of 2 jaws self center independent of each other.The 4T series is suitable for square bar and other nonuniform shaped workpieces.
Category
Contributed by
Company
Autogrip machinery Co Ltd
Configurations?
No
Downloads
84
Added on
31 Jul, 2017
Name
Description
CPCrank Type Synchronous ClampsIt's a CRANK type 2-jaw synchronous clamp with long jaw stroke.Matching surfaces of all parts hardened, ground and lubricated directly.Construction of high rigidity and high clamping accuracy.
Category
Contributed by
Company
Autogrip machinery Co Ltd
Configurations?
No
Downloads
15
Added on
31 Jul, 2017
Name
Description
None Provided
Category
Contributed by
Company
Autogrip machinery Co Ltd
Configurations?
No
Downloads
6
Added on
31 Jul, 2017
Name
Description
3P/3P-AWEDGE-HOOK type 3-Jaw Power ChuckIt's a WEDGE-HOOK type 3-jaw power chuck.Matching surfaces of all parts hardened, ground and lubricated directly.3P-03 is mini power chuck and suitable for bench lathe
Category
Contributed by
Company
Autogrip machinery Co Ltd
Configurations?
No
Downloads
66
Added on
31 Jul, 2017
Name
Description
3NInclined Master Jaws Power ChuckThe surface of the center covers through grinding treatment that couldable to in position base of the jig or the workpiece.The main jaws slideway oblique, improve the clamping force and float situation of the workpiece, equipped with standard top jaws.The chuck body and component through heat treatment to be enhance higher precision and lifetime.External gripping only
Category
Contributed by
Company
Autogrip machinery Co Ltd
Configurations?
No
Downloads
42
Added on
31 Jul, 2017
Name
Description
3MWEDGE-HOOK type 3-Jaw Long Jaw Stroke Power Chuck
Category
Contributed by
Company
Autogrip machinery Co Ltd
Configurations?
No
Downloads
23
Added on
31 Jul, 2017