172 ø x 51 mm

– Universally suitable for all AC voltages between 85 and 265 V.
– Fan speed not dependent on line frequency.
– Significantly reduced power consumption compared to conventional AC fans.

– Open loop speed control, sensor and alarm signal possible on request.

General attributes:
– Material: aluminium housing, fiberglass-reinforced PA impeller. Housing with grounding lug
for screw M4 x 8 (Torx).
– F

SolidComponents^TM

172 ø x 52 mm

– Universally suitable for all AC voltages between 85 and 265 V.
– Fan speed not dependent on line frequency.
– Significantly reduced power consumption compared to conventional AC fans.

– Open loop speed control, sensor and alarm signal possible on request.

General attributes:
– Material: aluminium housing, fiberglass-reinforced PA impeller. Housing with grounding lug
for screw M4 x 8 (Torx).
– F

SolidComponents^TM

119 x 119 x 32 mm

– Universally suitable for all AC voltages between 85 and 265 V.
– Fan speed not dependent on line frequency.
– Significantly reduced power consumption compared to conventional AC fans.

– Open loop speed control, sensor and alarm signal possible on request.

General attributes:
– Material: fibreglass reinforced plastic. PA impeller, PBTP housing.
– Fully integrated electronic commutation.
– Pr

SolidComponents^TM

119 x 119 x 25 mm

– Universally suitable for all AC voltages between 85 and 265 V.
– Fan speed not dependent on line frequency.
– Significantly reduced power consumption compared to conventional AC fans.

– Open loop speed control, sensor and alarm signal possible on request.
– Highly compression-insensitive characteristic curve for high air flow with high back pressure.
– Innovative impeller with winglets for low noise

SolidComponents^TM

92 x 92 x 38 mm

– Universally suitable for all AC voltages between 85 and 265 V.
– Fan speed not dependent on line frequency.
– Significantly reduced power consumption compared to conventional AC fans.


– Open loop speed control, sensor and alarm signal possible on request.
– Highly compression-insensitive characteristic curve for high air flow with high back pressure.
– Innovative impeller with winglets for low noise

SolidComponents^TM

80 x 80 x 32 mm

– Universally suitable for all AC voltages between 85 and 265 V.
– Fan speed not dependent on line frequency.
– Significantly reduced power consumption compared to conventional AC fans.


– Open loop speed control, sensor and alarm signal possible on request.

General attributes:
– Material: fibreglass reinforced plastic. PA impeller, PBTP housing.
– Fully integrated electronic commutation.

SolidComponents^TM

119 x 119 x 38 mm
– AC fans with external rotor shaded-pole motor. Impedance protected
against overloading.
– Metal fan housing and impeller


– Air intake over struts. Rotational direction CW looking at rotor.
Types 4890 N and 4840 N air exhaust over struts.
– Electrical connection via 2 flat pins 3.0 x 0.5 mm.
– Also availabel: Models with mounting bosses and single leads.
– Fan housing with ground lug for screw

SolidComponents^TM

119 x 119 x 25 mm
– AC fans with external rotor shaded-pole motor.
Protected against overloading by thermal cutout.
– Metal fan housing and impeller.
– Air exhaust over struts. Rotational direction CCW looking at rotor.

– Electrical connection via 2 flat pins 2.8 x 0.5 mm.
– Fan housing with ground lug and screw M4 x 8 (TORX).
– Mass: 800 g.

SolidComponents^TM

92 x 92 x 25 mm
– AC fans with internal rotor shaded-pole motor. Impedance protected against overloading.
– Metal fan housing, impeller of mineral-reinforced plastic PA.
– Air exhaust over struts. Rotational direction CCW looking at rotor.


– Electrical connection via 2 flat pins 2.8 x 0.5 mm.
– Fan housing with ground lug for screw M4.
– Mass 280 g.

SolidComponents^TM

80 x 80 x 38 mm
– AC fans with external rotor shaded-pole motor. Impedance protected against overloading.
– Metal fan housing and impeller.
– Air exhaust over struts. Rotational direction CW looking at rotor.


– Electrical connection via 2 leads. Stripped and tinned ends.
– Fan housing with ground lug for screw M4 x 8 (TORX).
– Mass 490 g.

SolidComponents^TM