Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=12 mm. - For Cylinder Range CD70 / CD210. -For Piston Diameter D=32 mm.

Supplier:
User Library
Model Name:
Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=12 mm. - For Cylinder Range CD70 / CD210. -For Piston Diameter D=32 mm.
Configuration Name:
Part Number:
CGK_12
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
Wrong PartNumber="CGK_12" specified. Please check the configuration information before proceeding: model configuration will be set to default configuration.
   
Modified on: August 20,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGK_12
Name:Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=12 mm. - For Cylinder Range CD70 / CD210. -For Piston Diameter D=32 mm.
Description:Based on the official Bosch Rexroth documentation, the self-aligning clevis (swivel head) you're looking for is the CGK 12, which has an internal bush diameter (CN) of 12 mm . This is confirmed to be the correct accessory for a CD70 cylinder with a 32 mm piston diameter . ✅ Product Specifications The table below lists the key specifications for the CGK 12 swivel head, as detailed in the Rexroth technical data sheets . Parameter Specification Type CGK 12 Material No. R900001327 Internal Bush Diameter (CN) 12 mm Thread (KK) M12 Weight 0.1 kg Static Load Rating (C₀) 24.5 kN Max. Admissible Load (Fadm) 8.1 kN Misalignment Angle (Z) 10° - 11° 🔧 Compatibility & Notes The CGK 12 is specifically designed for the CD70, CG70, CD210, and CG210 cylinder series . 📌 Installation Note: The self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque .
Supplier part number:CGK_12
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (23)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)
Contributor
Other contributions from this user

Parts & Assemblies

 

 

 
Hassan Hussein

User since: 8/13/2026
Title: Engineer
 
Skills:
Experience Developing Mechanical Components And Systems From Initial Concept To Manufacturing
Interests:
Mechanical Design. Computer-Aided Design (CAD). Mechanical Components. Manufacturing. Software Tools. Innovative Solutions. Efficiency, And Cost-Effectiveness.
 
  Report Inappropriate User